GRANDSTATE 11132311, Безопасность, установка, эксплуатация и техническое обслуживание, Страница: 21 / 41

21
Changing main burners
1. First, find out which main burner has been broken, if it’s not the far left one (if it’s the far left one, just remove
the broken one), remove from the far right burner, take out the circlip, take out the main burner, remove the
transmission frame; If the machine do not have transmission frame (like American version), just remove the
main burner, no need to take step 2.
To release the circlip, squeeze it and push it through the back of the firebox.
The circlip falls on the grease tray.
2. repeat step 1, from right side to left side to remove main burner and transmission frame,
until remove the broken one.
3. Change the bad main burner, from left to right by turn to set up main burner and transmission frame
(if do not have transmission frame, just change the main burner directly), use circlip to set.
4. For the change of the internal infrared burner (depending on the model) proceed the same way.
There are no transmission frames.
Cleaning instructions
Maintenance is recommended that every 90 days for your gas grill, but it is absolutely necessary to perform
maintenance at least once a year. By doing so, you will extend the life of your gas grill.
Your gas grill is easy to clean with minimum effort, just follow these helpful hints for cleaning convenience.
a) Turn the burner on for 15 to 20 minutes. Grease drippings will be burned off from your grill as well
as the flame tamer. Ensure appliance is cold before continuing.
b) Clean the grease tray and grease cup (depending on the model) after each use to reduce the risk of
grease fire or grease explosion.
c) Grids should be cleaned after every use by soaking and washing in soapy water.
If your grill has cast-iron grates, rub them with edible oil for protection after each cleaning.
d) The interior surfaces of the grill housing cover should also be washed with hot, soapy water.
Use a wire brush, steel wool or a scouring pad to remove stubborn spots.
e) Before use check the burner to see that it is free from insects and spiders which may clog the gas system,
deflecting gas flow. Ensure to clean venturi pipes on burner very carefully, make sure that there are no
obstructions.
We recommend that you use a pipe cleaner to clean the venturi pipe area.
f) Any modifications of this appliance may be dangerous and are not permitted.
TBS MANUAL GS FALCON 311 DIN A4 RZ.qxp 13.08.20 10:09 Seite 21