GRANDSTATE 11132311, Безопасность, установка, эксплуатация и техническое обслуживание, Страница: 20 / 41

20
Electric energy (model-specific)
Always use the correct type of battery. Replace all batteries at the same time and pay attention to the correct
polarity. If the ignition system does not work, you should first replace the batteries to exclude further sources
of error.
Products used in 4 x 1.5 V batteries to light the LED, use the 1 x 1.5 V battery to start the infrared side and
rear burner.
Battery type: AA 1.5 V for the LED light, AAA 1.5 V for the infrared side and rear burner.
Remarks: Some models have lights, some have no lights, infrared side and rear burner.
Replacing the igniter battery of infrared side burner / rear infrared burner (model-specific)
If igniters stop sparking, the battery should be replaced.
A. Change the igniter battery
1. The igniter button cap is located on the outside of the grill’s right side panel.
2. Unscrew igniter button cap counterclockwise to remove. Remove battery from the battery compartment.
3. Replace with a new alkaline “AAA” size battery. Insert the battery with the negative end first.
4. Screw igniter button cap clockwise into place.
A: „AAA“ Battery
B: Igniter Cap
Change the led battery (model-specific)
1. Find the battery box, open the lid.
2. Put 4 pc. “AA” size battery, the positive and negative pole of the battery should keep the same as
the pole in box.
3. Close the lid.
Hint
There’s a separate button on the left side of your BBQ for switching the LED illumination on and off.
TBS MANUAL GS FALCON 311 DIN A4 RZ.qxp 13.08.20 10:09 Seite 20