4.8
Before you attach the 609 you will need to loosen
the ML01 (nut) attached to the tops of the L08C-X.
Note: Loosen nuts on only one side at a time, i.e. right
front corner, right rear corner. See .
With 2 people proceed to install 609’s in this
order, note that 609 must be installed with
groove side down see . Compare with 610 to
make sure it will slide into 609 upon completion.
1. With one person holding the 609 level and in
position have the other person attach the 609 to the
601B using S04/ML01 (nut and bolt). See .
2. Now move the loosened S04/ML01 (nut and bolt)
currently attached to the 601A upward to firmly secure
the L08C-X, 609 and 601A together as shown in .
3. Repeat steps 1 and 2 for the other end of 609.
4. With one side firmly secured move to the other
side and repeat steps 1, 2 and 3.
5. Attach the mid roof 609’s with S04/ML01 nut
and bolt on both sides see .
MIDDLE ASSEMBLY CONTINUED
GRANDIO
T I P
Remove only one L08C-X
at a time. If all L08C-X’s
are removed, the structure will collapse
and cause unwarrantable damage.
23
STEP F
OUR
601B
609
Groove
UP
L08C-X
609
601A
Inside
View
601B
609
S04/ML01
L08D OR
L08B
Inside View
L08D OR
L08B
L08C-X
601A
LOOSEN
ML01
Inside View
