FRONT FRAME ASSEMBLY
8
STEP T
W
O
2.1
Prethread all S05 screws into the WG01
and WG02’s for ease of installation.
2.2
Use WG01 bracket to attach the (2)
601B’s together with the 603E, secure
parts with the S05 screws provided see .
The WG01 will slide into the groove of the
601B’s, and slide into the groove of the
603E .
2.3
Install WG02’s into (2) 601B’s then
tighten S05 screws when extrusions are
completely tight see . Note: the fat end of
the WG02 will always be on the bottom side.
GRANDIO
T I P
PRETHREAD SCREWS TIP:
Locate all WG01, WG02,
and S05 screws, pre thread these to make
installation easier. Note that the fat end on
the WG02 will always face downward.
Inside View
601B
601B
601B
601B
603E
WG01
WG02
WG02
WG01
601B
601B
S05
WG02
601B
603E
