14
8.3.2 iPhone User
Mega Pixel IP Camera supports iPhone’s browser, Safari. If user uses an iPhone to access to the Mega
Pixel IP Camera, the Video Setting page should appear as below.
Quality:
Select the video quality. The degrees of the video quality supported by Mega Pixel IP
Camera are from 1 to 100.
Resolution:
Select the video resolution. Mega Pixel IP Camera supports 4 kinds of resolution: 160
x 120, 320 x 240, 640 x 480 and 1280 x 1024.
Framerate:
Select the frame rate of the video.
Audio Input:
Enable/Disable the audio input of Mega Pixel IP Camera.
CMOS Freq:
Select the frequency of the CMOS sensor. Please accord to the frequency of the
power system (50Hz or 60 Hz) to determine this value.
Vflip:
Vertically rotate the video.
Mirror:
Horizontally rotate the video.
Save button:
Save the configuration. All configurations should be available after the
configurations are successfully saved.
15
View the Camera from iPhone
Step 1:
Assign your IP Camera an IP address and make your IP Camera accessible through the
Internet.
Step 2:
Connect your iPhone to the network via 3G or Wi-Fi (refer to your user’s manual of iPhone
for detail about network setting).
Step 3:
Open the Web browser (Safari) and enter the URL that you assign to your IP Camera (we
use IP in this case). Then the IP Camera will ask you user name (default user name:
root
) and
password (default password:
admin
) for authentication.
open the Web browser
enter the IP adress
enter the user name
and password
IP Camera’s Web page
