Page 16
24” - 30” Fire Pit Inserts
Standard Line Automated Operation
Section 5. Maintenance
Periodically clean the burner assembly and pit with a wet cloth or cleaning
solution to remove carbon build-up.
Frequency of the cleaning will depend on usage.
Periodically inspect the underside of the burner assembly for any signs of
excessive temperatures.
Check that all gas connections are tight.
The units should be cycled frequently, especially after a rain. The burner
assembly will not work in snow and ice conditions. The burner assembly
should be covered and protected from snow and ice. The burner should
not be operated in high wind conditions. High winds can limit the cooling air
required for cooling of the burner assembly and cause over heating of the
electronics.
Important:
Gas must be securely shut off when not in use.
Note:
If any problems are present, consult a licensed heating specialist or
call Grand Effects
®
.
