21
weight limit function (+/-)
This function is suitable to classify a list of products by weight, ruling out those that
are under or over the desired min or max weight.
Scale shows a bar with negative left extreme, and positive right extreme, and in the
center the accepted products.
This figure indicates if each product is in the desired range set. It uses a beep as
acoustic signaling. We offer a relay card to connect external advice or control devices.
Scale has 20 memories available for this function.
Weight limit saving and reply mode
1. Press
Scale will show
“PLUPro”. Press
to confirm, and display
will show at right the function memory position number.
2. To access to desired memory position, use
and
to increase
and decrease position number and set the desired one.
3. To confirm, press
.
4. Select nominal value, use
and
to increase and decrease
position to find the desired one. Use
and
to move to right or left
digit. Once you find the desired nominal value, press
to confirm.
5. Now we should introduce superior increase value for each display segment.
