Gram KF 132, Инструкция по эксплуатации

Страница: 25 / 40

25
The appliance is intended for connection to alter-
nating current. The connection values for voltage
(V) and frequency (Hz) are given on the name-
plate in the cabinet.
Power must be connected via a wall socket with
switch. The wall socket should be easily accessi-
ble.
All earthing requirements stipulated by the local
electricity authority must be observed. The appli-
ance plug and wall socket should then give cor-
rect earthing. If in doubt, contact your local suppli-
er or an authorised electrician.
WARNING
The flexible cord (mains lead) fitted to this appli-
ance has three cores for use with a 3-pin 13-amp
or 3-pin 15-amp plug. If a BS 1363 (13-amp) fused
plug is used, it should be fitted with a 13-amp fuse.
IMPORTANT
The cores in this mains lead are coloured in
accordance with the following code:
GREEN-AND-YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
These colours might not correspond with the colour
markings identifying the terminals in your plug.
Proceed as follows:
Connect the GREEN-AND-YELLOW core to the
GB
Electrical connection
4
You can change the
door from right-hinged
to left-hinged or vice
versa yourself
Illustration shows how easy it is to change
the doors from right-hinged to left-hinged - or vice
versa.
Reversing the refrigerator door:
(The table top on model KF 130 should be taken off
first by removing two screws at the front of the cabinet
and three at the back).
Lay the appliance on its back with the doors up.
Remove the door handle.
Take off the upper hinge bracket and remove the
door.
Unscrew the adjusting screws from the lower hin-
ge brackets and take the brackets off.
Move the pin on the hinge bracket to the other
threaded hole before refitting the hinge brackets
on the opposite lower side of the cabinet. Remem-
ber to replace the shim washer on the hinge pin.
Refit the adjusting screws and replace the door.
Refit the upper hinge bracket on the opposite side.
Refit the door handle.
Reversing the freezer door:
Unscrew the door and the bracket. Turn the door
180°. Re-attach the door and bracket on the op-
positeside.
The fridge/freezer must not be laid horizontally
while being transported or moved. If the appliance
has been tilted more than 40°, the power supply
must not be connected until the appliance has
stood upright for at least two hours.
plug terminal marked “E” or by an earth symbol, or
coloured GREEN or GREEN-AND-YELLOW. Con-
nect the BLUE core to the plug terminal marked “N”
or coloured BLACK. Connect the BROWN core to
the plug terminal marked “L” or coloured RED.
3
2