background image

2

 / 

1

6

 

1.

General 

notes

1.1 Safety 

The relevant accident prevention regulations must be observed during all 
work. Particularly when walking on the tanks, a 2nd person is required to 
secure the tank. 

The relevant regulations and standards must additionally be taken into 
consideration during installation, assembly, servicing, repair, etc.  

During all work on the system or parts of the system, the entire system 
must always be rendered inoperable and secured to prevent unauthorised 
reactivation. 

Except in the event of work carried out in the tank, the cover of the tank 
must always be kept sealed, as this otherwise constitutes a maximum risk 
of accident. Only original GRAF covers or covers approved in writing by 
GRAF must be used. 

GRAF  offers  an  extensive  range  of  accessories,  all  of  which  are  designed  to  match  each  other  and 
which  can  be  extended  to  form  complete  systems.  The  use  of  other  accessories  may  lead  to 
impediments to the system's functional capability, therefore invalidating liability for resulting damage. 

info

@graf

australia.com.au

 

www.graf

australia.com.au

 

Содержание 375026

















Отзывы: