Graef VA 802 Скачать руководство пользователя страница 9

Страница: 9 / 58

General Information

1.1.5.

Workplace

Only operate the machine if you are standing in a secure position.

Stand in front of the machine so that the power on/off button is facing you.
Keep your workplace clean at all times.

The machine must be positioned on a solid, even and stable base that can support the

weight of the machine and the dynamic forces of the moving parts.

1.1.6.

Authorised Users

The machine may only be operated by people who:
Have read and understood the operating instructions

Have been instructed thoroughly by the operator
Have been instructed on the dangers of the machine and the hygiene regulations

The machine may only be serviced and repaired by specialists.
Take precautions to prevent unauthorised persons from using, cleaning or servicing the

machine.

1.1.7.

Protective Clothing and Equipment

Wear close-fitting clothes when operating the machine. Please also observe the hygiene

regulations.
When executing cleaning or maintenance work in the area of the knife, be sure to wear

cut-resistant gloves with pulse protection.
When transporting the machine, be sure to always wear steel-toe boots.

Содержание VA 802



























































Результаты поиска

Содержание VA 802

Отзывы:

Похожие инструкции для VA 802

Бренды по названию

Популярные бренды

Graef VA 802, Руководство по эксплуатации

Результаты поиска

Содержание VA 802

Отзывы:

Похожие инструкции для VA 802

Бренды по названию

Популярные бренды