Graef HA 800 Скачать руководство пользователя страница 57

Страница: 57 / 57

Faults an Operating Errors

Fault Cause Measure

The slices are uneven

The food is not held properly
in place by the food holding
bar.

Chain frame is not properly in
place.

The placing arm is not
properly screwed on.

Use the guide rail.

Check that the chain frame is
firmly in position.

Tighten the star grip.

Placing program cannot be
changed

Program (not 0000) selected.

Press the PLU button and then
the Reset button; “PLU 0000”
appears in the display.

Slices, of bacon for example, are
placed too closely together in
fanning mode

Calibre mode is set to AUTO.

Switch to SEMI or HIGH mode.

Calibre recognition without
function

Guide rail is not placed on
the carriage.

Calibre mode is set to OFF.

Mount the guide rail.

Switch to AUTO, SEMI or HIGH
calibre mode.

Sliced product does not reach
the Chain and collects between
the pressing roller and the
scraper

Product residue has
accumulated on the scraper,
preventing sliced material
from passing through.

Take off the chain frame.
Clean the product residue
from the scraper. Check
whether the scraper touches
the blade.

7 Service

IMPORTANT!

Only use genuine GRAEF spare parts.
The use of other parts will invalidate the warranty (see also the declaration of

conformity)

Contact your GRAEF customer service If you require service or spare parts.

Содержание HA 800


























































Результаты поиска

Содержание HA 800

Отзывы:

Бренды по названию

Популярные бренды

Graef HA 800, Руководство по эксплуатации

Результаты поиска

Содержание HA 800

Отзывы:

Бренды по названию

Популярные бренды