Operation
32
a) Activation of calibre recognition “Auto”
In this mode, the placing pattern is calculated automatically using the parameters,
product width (B) and preset tray dimensions. The fanning distance, the distance
between rows and the initial placing position on the tray are calculated by the software.
b) “Semi” Mode
In this function, the placing positions in “X” are calculated by the calibre recognition.
Parameters in “Y”, such as fanning distance for long fanning, are predetermined values
that can only be changed in parameter programming.
c) Deactivate “OFF”
The machine now operates with the preset fanning distance and initial placing position of
the placing pattern. The carriage travel remains constant, regardless of the calibre.
d) Partial activation “Height XXX “
Some products (flat, long products such as bacon) require the specification of the product
height. The calibre recognition only registers the product width and assumes that product
height and width are identical. The machine operates with numerical values in steps of
5 mm. These values can be selected with the arrow keys.
Example: A piece of bacon with a height of approx. 40 mm is assigned the value 40.
y
x
Lengthways
distance
Y start
