Grady-White Boats Seafarer 228, Руководство пользователя, Страница: 62 / 66

8-10
Chapter 8: Seafarer 228
Operation Of Optional Features
Livewell - Raw Water
To operate the livewell, open the seacock located on the starboard side of the aft bilge using the
remote seacock arm labeled livewell. The livewell pump is screwed directly into this seacock. The
livewell switch at the helm should be in the on position. Place the livewell standpipe in the drain
located at the bottom of the livewell. Screw it down until the black flange makes contact with the
flange on the drain fitting. Water will enter through a fitting near the bottom of the livewell. The
water will rise to a depth even with the strainer on the standpipe and drain overboard. To evacuate
debris and bait waste from the bottom of the box while the livewell is in operation, unscrew the
standpipe approximately three turns to expose two ⅜" holes located in the threads of the standpipe
base. This will allow a small amount of water to escape through these holes and remove any waste
that has settled in the bottom of the livewell.
N OT I C E
If the livewell seacock is left open and the pump is not on, the boat’s forward motion through
the water will gradually fill the box. To prevent this inadvertent filling, close the seacock when
the livewell is not in use.
Under certain conditions, placing the outboard engine(s) in reverse will ventilate the water
under the boat and create an air lock in the livewell pump. To prevent this situation from
occurring, it is recommended the livewell be turned off prior to any high RPM or continuous
reverse operation. If the livewell pump becomes air-locked, correct this situation by turning
the pump off for 20 seconds.
Outriggers
Outriggers allow you to spread the lines trolled from your boat and decrease the chance of
entanglement.
• Advantages
-
Advantages of outriggers include: offering bait throughout a larger area behind the
boat, placing bait out of the wake zone, automatic drop back following strikes (which
allows for fish to completely accept bait), and a reduction in unnecessary twisting
action characteristic of artificial bait.
• Instructions
-
For proper installation and use, reference the instruction sheet in your Owner’s Packet.
• Care and Maintenance
-
Outriggers should be washed with freshwater, a mild soap and a soft cloth. The
outrigger poles should be sprayed down with freshwater. Never use acidic or abrasive
cleaners on outriggers.