Grady-White Boats Gulfstream 232, Руководство пользователя

Страница: 44 / 76

6-4
Chapter 6: Maintenance and Service
Canvas
Grady-White’s canvas is made using the highest quality vinyl and latest sewing techniques. The
canvas will not be completely leak proof. The seam holes in your canvas may stretch and tend to
leak. However, you can correct this problem by applying Apseal
®
or Uniseal™ to the seams.
Please understand that Grady-White does not warrant the fit and design of the canvas to be
entirely watertight.
Maintenance
To maintain your boat’s top and other canvas follow these guidelines:
• Clean the fabric regularly to prevent the buildup of soil and soil penetration of the fabric.
Simply brush off any loose dirt, hose down canvas and clean with a mild solution and
wtarm water.
• Do not use petroleum-based or ammonia cleaners on canvas or clear vinyl as they will
yellow.
• For heavily soiled fabric, remove from the frame. Soak the fabric in a solution of
1
⁄
2
cup
(.12 L) of Clorox ® and
1
⁄
4
cup (.06 L)of Ivory ® or Lux ® soap per 1 gallon (3.8 L) of warm
water.
• Let soak until mildew and stains can be brushed out with a common kitchen brush.
• Rinse thoroughly with cold water until all soap is removed.
• Allow fabric to air dry completely.
NOTE: Do not steam press or dry in an electric or gas dryer. This will damage the canvas fabric.
Water repellent was applied to your canvas during manufacturing. The repellent may have
diminished after extended cleaning. Re-treatment of the fabric is recommended after extended
cleaning. Do not use wax-based treatment products. Use a water based repellent like Apseal
® or
Uniseal
®
. Scotchguard
®
is effective for short-term use only.
Snaps and Zippers
To protect the snaps and zippers on your boat’s canvas and cushions from corrosion and
binding, Grady-White includes a tube of lubricant (E-Z Snap
®
) in your Owner’s Packet. The
lubricant, manufactured by IOSSO (part number 10909), should be applied per the
manufacturer’s directions during the initial use of your canvas and cushions. The lubricant
should be reapplied every 3 months or sooner depending on your boating environment and
usage. Contact your dealer if you need to reorder lubricant. A snap assist tool should be used
whenever you remove the canvas or cushions to prevent damaging or tearing the material.
Vinyl
• Clean clear vinyl thoroughly with denatured alcohol and apply a protective layer of clear
wax. Do not use paste wax, as it will turn the vinyl yellow. This process should be repeated
as necessary to maintain the protective wax coating.
• Store and secure canvas before trailering.
• Dry all canvas before storing to prevent mildew.