background image

5-5

Chapter 5: Instrumentation

The Electronic Key Switch uses a radio frequency key to power the main ignition panel. Touch 

the key to the panel and two audible beeps indicate the system is unlocked. Press the Ignition 
button, then the Start/Stop button to start the engines. To engage the Y-COP security system touch 
the key to the panel after the engines are turned off. A single audible beep indicates the system is 
immobilized.

The Command Link Plus

®

 display allows the operator to adjust and customize settings, though 

some settings must be adjusted by an authorized technician. The information provided here is only 
intended to be an overview of the system. For complete details on the operation and set-up of the 
Helm Master system please refer to the Yamaha owner’s manual or consult your dealer.

Switch Panel

At the helm station you will find an accessory switch panel. Not all boats are equipped with the 

same accessories. Consult your dealer for specific information or questions on the accessories 
included on your boat. More detailed descriptions of switch functions are located in Chapter 8 of 
this manual. 

 

This drawing represents a generic switch panel layout. Actual panels will differ depending on 

the boat model and optional accessories installed during manufacturing.

Содержание Gulfstream 232













































































Отзывы: