Grady-White Boats Canyon 306 Скачать руководство пользователя | Manualshive

Страница: 56 / 74

background image

8-4

Chapter 8: Canyon 306

Anchor Windlass

The anchor windlass includes a stainless steel bow roller. Please refer to the anchor windlass

owner’s manual for proper operation of the windlass.

Battery Select Switches

The Canyon 306 is equipped with three batteries and two select switches. Two of the batteries

are wired in parallel and function as a single battery bank (“1” on the switches). The third battery is
a separate bank (“2” on the switches). An outboard engine should be connected to each battery
select switch. Either engine may be started with either battery bank by selecting position “1” or
position “2”. In normal use, select position “1” on the starboard switch and position “2” on the port
switch so that both battery banks will be charged simultaneously when the engines are running.
The DC accessories on the boat will always be controlled by the starboard switch. The recommended
setting also insures that the accessories are being powered by the larger battery bank.

C A U T I O N

Never turn the battery select switch to the “off” position with the engine running as this could
damage the charging system.

Bilge Pumps/Float Switch

Your boat is equipped with automatic float switches adjacent to the bilge pumps. A float switch

will enable the bilge pump to come on automatically if a significant amount of water accumulates in
the bilge. These switches are wired directly to the batteries. They function independently of the
battery select switches and can activate the bilge pump with the battery select switches in the “off”
position. Batteries should be inspected frequently to ensure proper operation. The bilge pumps are
also equipped with switches at the helm. When a switch is in the “off” position, the pump is off
unless activated by the float switch.

C A U T I O N

To prevent damage to the bilge pump, do not run it dry for a prolonged period of time.

Bilge Pump Location

There aft bilge pump is located under the center motorwell access plate, forward of the transom.

The forward bilge pump is located under the rectangular hatch in the lower rigging compartment
inside the console.

«
...
54
55
56
57
58
...
»

Содержание Canyon 306











































































Отзывы:

Нет отзывов

Похожие инструкции для Canyon 306

Sun Odyssey 379

Бренд: Jeanneau Страницы: 154

MERRY FISHER 6 MARLIN

Бренд: Jeanneau Страницы: 84

Бренд: Maxxon Страницы: 6

Бренд: BENETEAU Страницы: 43

Sun Odyssey 43 DS

Бренд: Jeanneau Страницы: 58

190 InShore 2014 Series

Бренд: Edgewater Networks Страницы: 214

Бренд: Paddle King Страницы: 11

2014 Waverunner FX Cruiser HO

Бренд: Yamaha Страницы: 124

2005 SuperJet 700

Бренд: Yamaha Страницы: 114

Бренд: Otter Outdoors Страницы: 9

Бренд: Sea Ray Страницы: 110

Бренд: Sea Ray Страницы: 188

480 Sedan Bridge

Бренд: Sea Ray Страницы: 101

Бренд: Sea Ray Страницы: 210

Бренд: Sea Ray Страницы: 184

2009 Grand Sport 29

Бренд: Pro-Line Boats Страницы: 54

Бренд: LRP Страницы: 24

Бренд: Hewescraft Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды