Grady-White Boats Canyon 271 Скачать руководство пользователя

Страница: 29 / 72

4-3

e r f o r m a n C e

C A U T I O N

Do not paint the outboard motors with anti-fouling paints designed for boat hulls . Many of these

paints can cause severe damage to the engines .

TeerInG

Most outboard engines are equipped with an adjustable rudder trim tab. This trim tab should be

adjusted to balance the steering at the speed which you travel most frequently. Variations in speed,

boat load or engine trim will cause the steering to pull in one direction. If the boat pulls to the left,

adjust the trim tab to the left and vice-versa.

•

Hydraulic Steering

Hydraulic steering systems require regular preventative maintenance for continued safe and

reliable operation. The oil level in the helm pump must be maintained within acceptable

operating levels. A low oil level will allow air to get into the steering system and result in

unresponsive steering. The oil level should always be at the base of the threads in the filler

hole, located on the front top portion of the helm pump. Check the entire steering system

regularly for oil leaks. Unobserved leaks over a period of time will result in unresponsive

steering and possibly loss of steering. Refer to the steering manual for specific

recommendations and additional maintenance requirements. Any slow or sudden change in

the “feel” of your steering system indicates an immediate need for a thorough inspection.

All repairs and replacements to steering systems should be made only by a qualified marine

technician.

•

Tilt Steering

If tilt steering is available on your model, this accessory will be in conjunction with either

mechanical steering or hydraulic steering depending on the model. This feature enables the

operator to tilt the wheel up or down. Refer to the steering system’s manual for information

on oil levels with hydraulic tilt steering.

Содержание Canyon 271









































































Результаты поиска

Содержание Canyon 271

Отзывы:

Похожие инструкции для Canyon 271

Бренды по названию

Популярные бренды

Grady-White Boats Canyon 271, Руководство пользователя

Результаты поиска

Содержание Canyon 271

Отзывы:

Похожие инструкции для Canyon 271

Бренды по названию

Популярные бренды