grado RM355, Инструкция по эксплуатации

Страница: 22 / 32

ENGLISH 22
11.2 Get the room temperature
1. When the thermometer has been turned on, room temperature will be shown on
the screen with icon. Room temperature, date and time will alternately display
every 3 seconds. (See figure 4)
2. For room temperature, the thermometer should be placed on the table and avoid
the direct sunshine or air conditioner flow on.
3. The room temperature can be reference after 5 minute later when taking
the temperature.
(Fig.5)
11.3 To measure ear temperature
1. To achieve accurate readings, make sure a new, clean probe cover is in place before each measurement. Place
a new probe cover on the probe firmly; making sure the probe and the inner portion of the probe cover fit
snugly. To ensure proper hygiene and to avoid contamination, a new probe cover should be applied for each user.
2. Press the TEST BUTTON, you can get the body temperature by ear measurement after hearing two
beep sounds.
(Fig.6)
Remarks:
a. Probe cover sign stand for taking the ear temperature with probe cover now and vice versa.
b. To avoid the risk of cross contamination, it is recommended that you always measure the ear temperature
with probe cover.
c. If you see as shown in figure 6 shows, it stand for the mode of taking the object temperature. You can press and hold
BUTTON and then press and hold the TEST BUTTON to switch the mode between ear mode and object mode.
3. Insert the probe along the ear canal as deep as possible into the ear as depicted in Figure 7. Then press the
TEST BUTTON once to start the measurement. A long beep will sound approximately 1 second after the TEST
BUTTON is activated. This signals the end of the process as results are displayed on the LCD screen.
4. The thermometer is ready for testing again once an ear mark displays on the LCD. A waiting period of 20
seconds between testing is recommended to avoid excessive cooling of the skin.
5. The thermometer will shut off automatically after 60 seconds of inactivity. To prolong battery life, press the
BUTTON to turn the unit off.
11.4 To measure object temperature
(Fig.8)
1. Eject the probe cover out firstly. Press the TEST BUTTON to turn on the thermometer, you can
take the object temperature after hearing two beep sounds. (see figure 5)
Remarks:
a. This mode shows the actual, unadjusted surface temperatures, which is different from
the body temperature.
b. If you see as shown in figure 3 shows, it stand for the mode of taking the ear temperature. You
can press and hold BUTTON and then press and hold the TEST BUTTON to switch the mode between ear mode
and object mode.