background image

CHECKS AND SERVICES

BEFORE STARTING ENGINE

Complete all required maintenance before driving the carrier

Inspect carrier 

for obvious damage, vandalism

and needed maintenance. Check for signs of fuel,
lubricant, coolant and hydraulic leaks. Open access
doors and look for loose fittings, clamps, com-
ponents and attaching hardware. 

Check brake and

steering systems 

for obvious damage.

 Check

operation 

of all lights and repair as necessary

before operating. Broken windows must be replaced
before operating. If spark arrestors are used, be sure
they are in place and in good working order.

Check for fully charged

 fire extinguisher 

on rear

wall in carrier cab. Be sure to read and understand
instructions on extinguisher. Replace extinguisher
as necessary.

Check fluid level in

 windshield washer 

reservoir

on rear wall in carrier cab. Add windshield washer
solvent as necessary.

                                     WARNING

Use extreme caution when checking
items beyond your normal reach. Use
an approved safety ladder.

Check for

  secure stowage 

of boom and any

auxiliary equipment or material.

Check position of 

DIGGING BRAKE 

toggle.

Toggle should be in OFF position for operation
from carrier cab. Be sure parking brake is applied
before moving toggle to OFF position.

1 3

Содержание XL4100











































Отзывы: