Graco XD30 Series Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 10

Graco XD30 Series Скачать руководство пользователя страница 3

Warnings

3A0142A

3

Disassembly

NOTE:

Part numbers provided in these instructions cor-

respond to the part numbers used on the assembly
drawing provided in the XD30 High Capacity Hose Reel
Instruction Manual.

Unless otherwise noted, do not discard removed parts.
They will be reused for reassembly.

1.

Relieve the pressure

(page

2.

Decrease spring tension (page 7).

3.

Remove reel from service by removing 4 screws (A)
holding reel base to mounting surface (F

4.

Remove nuts (51) and screws (50) to remove hose
stop (49) from end of hose (F

5.

Disconnect hose fitting (B) from swivel fitting (23)
(F

Unless otherwise noted, steps 6 - 11 refer to F

6.

Remove large nut (32).

7.

Remove two screws (27) holding pedestal (26) to
base (24) and three screws (52) and nuts (53) hold-
ing hose guide (31) to guide arm (30).

8.

Completely remove guide arm and pedestal assem-
bly (26 / 30) and set it aside to reinstall on the new
spool. These parts do not have to be disassembled.

Never allow the reel to spin freely!

Most hose reel spools are replaced due to a broken
spring. Even though the spring is broken, there may
still be tension left in the spring which could cause the
reel to spin freely. Doing so causes the reel to spin out
of control, which could cause serious injury if you are
hit by the hose or other moving parts.

To ensure all tension is completely removed from the
spring, decrease spring tension using the procedure
provided on page 9.

F

IG

. 3

A

F

IG

. 4

F

IG

. 5

50

49

51

B

23

«
1
2
3
4
5
...
»

Содержание XD30 Series











Отзывы:

Нет отзывов