•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Copyright © 2021 White Knight Fluid Handling | A Graco company
Version 1.0.1 | 3 December 2021 | Page 6
187 E. 670 S., Kamas, UT 84036
435.783.6040 888.796.2476
2.2. General Environmental Conditions
Table 2
Usage
Indoor Use
Altitude
Up 2000 m
Operating ambient temperature
0-40 °C
Maximum Humidity
80%
AC Mains supply fluctuations
±10% of nominal voltage
Transient
overvoltage’s typically present on the mains
supply
Surge immunity according to EN61000-4-5
Pollution degree
2
2.3. Sealing and Material Compatibility
2.3.1. Material Compatibility
All fluid path materials are PTFE or PFA
2.3.2. Sealing Methods
The method for sealing components of the fluid path is with PTFE tongue and groove seals.
2.3.3. Lifting the Pump
The pump should be lifted using the center of the product as shown in image. Where available make use of rolling
cart for transportation. Do not carry pump by liquid connections.