3
307160
WARNING
INJECTION HAZARD
Spray from the gun/valve, leaks or ruptured components can inject fluid into your body and cause ex-
tremely serious injury, including the need for amputation. Fluid splashed in the eyes or on the skin can
also cause serious injury.
D
Fluid injected into the skin might look like just a cut, but it is a serious injury. Get immediate medi-
cal attention.
D
Do not point the gun/valve at anyone or at any part of the body.
D
Do not put your hand or fingers over the spray tip/valve nozzle.
D
Do not stop or deflect leaks with your hand, body, glove or rag.
D
Do not “blow back” fluid; this is not an air spray system.
D
Always have the tip guard and the trigger guard on the gun/valve when spraying/dispensing.
D
Be sure the gun/valve trigger safety operates before spraying/dispensing.
D
Lock the gun/valve trigger safety when you stop spraying/dispensing.
D
Follow the
Pressure Relief Procedure
on page 8 if the spray tip clogs and before cleaning,
checking or servicing the equipment.
D
Tighten all fluid connections before operating the equipment.
D
Check the hoses, tubes, and couplings daily. Replace worn, damaged, or loose parts immediately.
Permanently coupled hoses cannot be repaired; replace the entire hose.
MOVING PARTS HAZARD
Moving parts can pinch or amputate your fingers.
D
Keep clear of all moving parts when starting or operating the pump.
D
Before checking or servicing the equipment, follow the
Pressure Relief Procedure
on page 8 to
prevent the equipment from starting unexpectedly.