Selector Switch Knob (TX 125)
21
Selector Switch Knob (TX 125)
Use Knob Repair Kit 288768.
Disassembly
1.
Turn selector switch knob clockwise until it points
down.
2.
Use wrench to remove nut from knob.
3.
Pull knob straight off from sprayer.
Assembly
1.
Position new knob to point down and slide it onto
exposed spline.
2.
Apply Locktite (1 drop or small amount) to knob nut
and tighten with wrench.
Once knob has been removed, don’t move the
exposed spline. If it is moved, use your fingers to
turn it clockwise as far as it will go for a tight fit prior
to reassembly of knob. This will properly align knob
to spline.
ti8729a
ti9441a
ti9439a
ti9435a
ti9436a