6 V
ehicle
Information
70
Grab the sides of the seat at the belt
path and slide side to side and front
to back. The base or seat should
not move more than 1” (2.5 cm).
Locking Latch Plate
and No Retractor
When installing the car
seat, route the lap seat belt
through the proper path
and buckle it in. Then, pull
upwards on the tail of the
belt so that the lap belt gets
tight around the car seat.
Sewn On Latch Plate
and ALR Retractor
Slowly pull the lap belt
all the way out.
Route
the vehicle seat lap belt
through the proper belt
path and buckle it in. Then,
pull the lap belt tight while
feeding all the slack back
into the retractor.
Grab the sides of the seat at the belt
path and slide side to side and front
to back. The base or seat should
not move more than 1” (2.5 cm).
Lap Belt Installation
Always review your vehicle owner’s manual for specific
information about your vehicle seat belts.