Electro-pneumatic Control Panel Display Screens
Network
Network
Network
To reduce the risk of injury due to electric
shock, remove power to the control panel before
entering the control panel to make connections for
measurement devices.
The Network page is used to configure the STU for
network communication.
Currently, the only functionality enabled via a network
connection is access to a viewable-only virtual
network computing (VNC) server. Contact Graco
Customer Support for information regarding Network
Communication Protocols.
To access the view-only VNC connection, connect
the Control Panel via an Ethernet connection, then
open a VNC window and connect to the IP address
of the Control Panel using the password "view”.
Icon/Field
Icon/Field
Icon/Field
Description
Description
Description
DHCP
DHCP
DHCP
Check to enable Dynamic Host Configuration Protocol for the network connection.
IP
IP
IP Address
Address
Address
The current IP Address of the system is displayed here. If DHCP is disabled, these fields
become editable to enter a static IP address.
Subnet
Subnet
Subnet Mask
Mask
Mask
The current Subnet Mask utilized by the system is displayed here. If DHCP is disabled,
these fields become editable to enter a Subnet Mask.
If DHCP is disabled and the IP address or the Subnet Mask has been edited, the
corresponding Save button will be active. Press it to save the IP address or subnet mask
before leaving the Network screen, or changes will be lost.
56
3A5416E
