Safety
Safety
Safety Latch
Latch
Latch
The overall system weighs about 2400–3400 lb.
(1089–1542 kg). To prevent being trapped under
the ram plate, always set the manual safety latch to
the Engage position when working under the plate.
Install
Install
Install Lockout
Lockout
Lockout Extension
Extension
Extension
A safety latch lockout extension rod (W) is provided
for use on the safety latch. Installation of the
extension rod requires the safety latch to be
disengaged.
1.
Disengage the safety latch. See Disengaging
Disengaging
Disengaging the
the
the
Safety
Safety
Safety Latch
Latch
Latch.
2.
Use the Ram Jog icon to lower the ram plate to
its lowest position.
3.
Follow the
Pressure Relief Procedure, page 24
.
4.
Insert the safety latch extension rod (W) through
the bracket (X). With the polymer insert nut
provided, attach the extension rod to the safety
latch at the D-shaped hole on the latch.
Safety
Safety
Safety Latch
Latch
Latch Lockout
Lockout
Lockout
Lockout/tagout holes have been provided to lock the
ram in the raised position.
1.
Push the safety latch handle all the way in to
align the lockout/tagout holes (Y).
2.
Insert a padlock through the hole and lock in
place.
Engaging
Engaging
Engaging the
the
the Safety
Safety
Safety Latch
Latch
Latch
1.
Using the ram position selector, raise ram until it
stops at the maximum height.
NOTE:
NOTE:
NOTE: The safety latch must align with the
grooves in the cylinder center rods to move.
2.
Push the safety latch handle in the direction
shown to engage with the groove in the cylinder
rod (shown engaged).
Disengaging
Disengaging
Disengaging the
the
the Safety
Safety
Safety Latch
Latch
Latch
1.
Using the ram position control panel selector,
make sure the plate is raised all the way up (not
resting on the safety latch).
2.
Pull the safety latch handle all the way out to
disengage the groove in the cylinder rod.
16
3A5416E
