Graco SaniForce FW1111, Инструкция по эксплуатации

Страница: 9 / 34

Installation
3A4238B 9
Fluid Outlet Line
1. Use flexible grounded fluid hoses (L).
2. For best sealing results, use a standard tri-clamp or
DIN style sanitary gasket of a flexible material such
as EPDM, Buna-N, fluoroelastomer, or silicon
3. Install a fluid drain valve (J) near the fluid outlet. See
the
WARNING above, and F
IG
. 2.
4. Install a shutoff valve (K) in the fluid outlet line.
F
IG
. 2 Typical Floor-Mount Installation
A fluid drain valve (J) is required to relieve pressure
in the hose if it is plugged. The drain valve reduces
the risk of serious injury, including splashing in the
eyes or on the skin, or contamination from hazard-
ous fluids when relieving pressure. Install the valve
close to the pump fluid outlet. See F
IG
. 2.
TI8930a
Key:
A Air supply line
B Bleed-type master air valve (required
for pump)
C Air regulator
D Air line quick disconnect
E Master air valve (for accessories)
F Air line filter
G Flexible fluid suction line
J Fluid drain valve (required)
K Fluid shutoff valve
L Flexible fluid line
Y Ground wire (required; see page
7 for installation instructions)
E
F
C
B
A
K
L
J
G
Y
D