![Graco SaniForce BES Series Скачать руководство пользователя страница 32](http://html.mh-extra.com/html/graco/saniforce-bes-series/saniforce-bes-series_instructions-parts-list-manual_2253297032.webp)
Service
32
311163ZAH
Replacing Ram Plate Seal or
Corner Seals (All Models)
See F
IG
. 16.
1. Follow the
procedure, page 31.
2.
If you are only replacing the corner seals (21)
and not the ram plate seal (501,
remove the rivet
(22) and replace each corner seal individually. Do
not remove all 4 corner seals at the same time or
the ram plate seal may move out of place. Be care-
ful not to puncture the ram plate seal. Skip to step 8.
If you are replacing the ram plate seal (501),
remove the rivets (22), then remove all 4 corner
seals (21). Check the corner seals for damage and
replace if necessary.
3. Disconnect the tube fitting (29) from the seal air
supply tube (14).
4. Remove the ram plate seal (501), using a blunt-end
tool to avoid damaging the seal. Carefully disen-
gage the air stem from the hole in the ram plate
(502).
5. Insert the air stem of the new seal (501) into the ram
plate (502) hole. To avoid puncturing the new seal,
carefully slide the seal in place around the ram
plate.
6. Install the four corner seals (21) with rivets (22).
7. Connect the air supply tube (14) to the tube fitting
(29).
8. Check operation by inflating and deflating the seal.
Check for air leaks. After loading a bin of material
into the frame, check whether material leaks around
the ram plate and seals.
F
IG
. 16: Repair (BESA7A Shown)
TI16216a
TI16218a
21
502
501
29
4
408,
409,
410
402
Содержание SaniForce BES Series
Страница 4: ...Models 4 311163ZAH ...