Component Function
3A5385A
9
5. Close paint gun ball valves.
6. Open all drain valves, one at a time.
7. Close valves immediately to prevent paint from dry-
ing in system.
8. If you suspect the spray tip or hose is clogged or
that pressure has not been fully relieved:
a. VERY SLOWLY loosen the tip guard retaining
nut or the hose end coupling and relieve pres-
sure gradually.
b. Loosen the nut or the coupling completely.
c. Clear the obstruction in the hose or tip.
Bead System Pressure Relief
1. Relieve air pressure in bead tank by turning bead
system valve to OFF position.
Air System Pressure Relief and
Condensation Drain
1. Relieve air pressure and drain condensation in air
tank by turning air valve to OPEN position.
ti15953a
ti16550a
ti16961a