Hydraulic Pump Replacement
3A5385A
21
4. Slide keyless bushing into pulley, ensure bushing is
centered in the hub, then hand tighten to hold its
position.
5. Replace pulley-bushing assembly (96) onto hydrau-
lic pump shaft. Ensure inside gripping area of bush-
ing spans across the pump shaft key-way, and the
shaft is inserted to, or past, the groove in bushing.
6. Align pulley (96) on shaft. Place pin through pulley
and pump plates, then torque keyless bushing to a
maximum of
100 ft-lb (RoadPak) and 125 ft-lb
(RoadPak HD).
