Operation
3A2091B
31
11. Close dump valves.
12. Open only spray gun ball valves corresponding to
paint pumps or color used.
NOTE:
Never open both
valves on the two-color gun at the same time. Paint
color contamination could result.
13. Place empty pail under spray guns to catch
drainage from spray guns.
14. Turn guns on with Programmable Skipline
Controller.
15. Set hydraulic valves to ON position to activate
pumps.
16. When flushing fluid comes out of spray gun, set
hydraulic valve to OFF position.
17. Turn off guns with Programmable Skipline
Controller.
18. Shut off engine and Programmable Skipline Control-
ler.
19. Leave paint pump dump valves and spray gun ball
valves open.
20. Remove and secure ground clamp from earth
ground.
ti16551a
ti16920a
