Operation
28
3A2091B
Start Engine
1.
Set POWER ON/OFF on Programmable Skipline
Controller to ON.
2.
Set engine to choke position ON.
3.
Set throttle to half speed and turn key.
4.
After engine starts, set choke to OFF.
Select/Prime Pumps
1.
Open hydraulic valves to activate pumps.
2.
Slowly turn pressure control clockwise until pump
begins to stroke.
3.
When flushing fluid comes out of return lines, set
hydraulic valve to OFF position.
4.
Place suction hoses in paint drums.
5.
Open hydraulic valves to activate pumps.
6.
When paint comes out of return lines, set hydraulic
valve to OFF position.
7.
Close all prime valves.
8.
Place return lines into paint drum.
ti16920a
ti16922a
ti15838a
ti16645a
ti16920a
ti16551a
