background image

Setup Mode 

◆ 

Color Screen

32

310633C

Color Screen

Use the Color screen to enter information about each of 
the colors available on the system. The Color screen is 
also used to setup system purge time, using Color 0 
(page 32).

Color

Select the number for the color you want to setup or edit. 

Only the number of colors selected in Advanced 
Screen 2 (page 36) are shown on the Color 
drop-down list.

Selecting a different color in the Setup mode does 
not affect the color currently selected on the Opera-
tor Station.

Colors 1-6 Setup

There are five values to set. Use information from the 
material data sheet or from your material supplier.

Ratio

Set the volumetric ratio of component A to B from 0.0:1 
to 30:1, in increments of 0.1. 

Tolerance

Set the ratio tolerance of the color from 1–99% in incre-
ments of 1%. To minimize nuisance alarms, select the 
largest tolerance value that meets the paint manufac-
turer’s recommendations and your production require-
ments.

Potlife Time

Set the potlife time from 1–999 minutes in increments of 
1 minute. Select a time that is within your material’s 
sprayable potlife time so if the potlife is exceeded and an 
alarm occurs, you have sufficient time to spray or purge 
the mix material from the system.

Purge Time

This setting is used during Purge mode and color 
change. It can be set from 0–999 seconds in increments 
of 1 second. See ProMix™ II Purge Sequence an
ProMix™ II Color Change Sequence, page 33.

Fill Time

This setting is used during color change to set the 
amount of time the system spends loading the new 
color. It can be set from 0–999 seconds in increments of 
1 second. Set Fill Time for at least 5 seconds longer 
than the time it takes to see a new color at the gun. See 
ProMix™ II Color Change Sequence, page 33. 

Color 0 Setup

Color 0 is used in multiple color systems to purge out 
material lines without loading a new color. It is typically 
selected at the end of a shift to prevent hardening of cat-
alyzed material

When you select 0 from the setup Color list, the Color 0 
Setup screen appears. Set purge time from 0–999 sec-
onds in increments of 1 second.

F

IG

. 33: Setup Mode - Color Setup Screen

0.0:1 is a special setting, indicating only component 
A is dispensed, for use with 1 component materials.

Setup 
Screen 
Menu

Drop-

down

list

CAUTION

The ProMix™ II potlife timer will not function properly 
when used with multiple guns operating simultane-
ously. To avoid having mixed material set in the equip-
ment, carefully monitor potlife by some other means.

F

IG

. 34: Setup Mode - Color 0 Setup Screen

Содержание ProMix II



























































Отзывы: