Graco PD273950A, Руководство пользователя

Страница: 23 / 120

23
f
7. Hold seat and pull front to back and
left to right at belt path to check for
secure installation
(f) . The child
restraint should not move side to side
or forward more than 1 inch (2.5 cm).
8. Check that the lower anchor belt stays tight and
does not slip from the tightened position. If it does
not stay tight, try another seating position or
contact Customer Service.
9. Attach tether strap hook (A) to anchor
hardware (B) and tighten adjustment belt to
remove any slack (g) . Belt must lie flat and not be
twisted. Periodically check that child restraint is
securely installed; adjust if necessary.
• Do not use the lower anchors of the child restraint
anchorage system ( LATCH system) to attach this child
restraint when restraining a child weighing more than
42 lbs (19 kg) with the internal harnesses of the child
restraint.
NOTE: Some vehicle manufacturers have
lower maximum weight ratings for LATCH anchors, so
you must consult your vehicle owner’s manual or call
the vehicle manufacturer to confirm the limits on your
vehicle’s
LATCH anchors.
g
Pull to
Tighten
A
B
Tether
LATCH
• To remove LATCH ,
see “Removing LATCH
from Vehicle Anchor
Points”, p. 39.