Graco PD273950A, Руководство пользователя

Страница: 20 / 120

20
REAR-FACING INSTALLATION WITH LATCH
1. Pull out on handle on front of child
restraint (a) and adjust to rear-facing
position 1 (b) . Make sure
forward-facing LATCH belt is stored.
(see fig. c, pg. 40)
2. Place rear-facing on vehicle seat
equipped with LATCH anchors.
3. For ease of installation, extend
LATCH belt to its maximum length.
4. Attach rear-facing connectors to
vehicle lower anchors (c) . Belt must lie
flat and not be twisted. Pull connectors
to be sure they are securely attached to
the anchor points.
(d) .
5. Press down firmly in center of child
restraint while pulling LATCH
adjustment belt through slot in
seat pad
(e) . When finished tightening,
make sure free end of adjustment belt is
outside the seating area
(f) .
a
b
d
e
c
f
CLICK!
Slot