Graco Magnum Pro Compact A15 258861, Руководство по эксплуатации

Страница: 21 / 28

Troubleshooting
3A0885E 21
Spray pattern is too wide: Sprayer is too far away from target surface.
Incorrect tip for application of material.
Move sprayer closer to surface.
See Reversible Tip Selection Chart, page 12.
Spray pattern “spits” at the end: Excess material has accumulated on Spray
Tip/Guard Assembly.
Tip filter is partially clogged.
Tip/Guard Assembly not threaded com-
pletely onto sprayer.
Seat is worn.
See Shutdown and Cleaning, page 15.
Clean or replace filter. See page 14.
See Install Tip/Guard Assembly, page 12.
Replace Spray tip.
Tip continues to drip or ooze
material after trigger is
released: Sprayer is worn out. Replace sprayer.
Spray pattern does not
adequately cover target
surface Fine Finish Optimizer is installed while using
an incompatible material.
Sprayer is worn out.
Make sure compatible material is being used.
See Reversible Tip Selection Chart, page 12.
Replace sprayer.
Problem Cause Solution
ti15527a
ti15525a
ti15528a