Pressure Control Transducer
22
332252A
Pressure Control Transducer
Removal
1.
Perform
Relieve Pressure Procedure
, page 6.
Wait 5 minutes before servicing. Unplug power
cord.
2.
Remove shroud, page 18.
3.
Unplug transducer wire.
4.
Remove pressure control box, page 19.
5.
Remove transducer wiring grommet (86g).
6.
Remove wire from retaining clip.
7.
Remove transducer wiring protector (88).
8.
Use wrench to unscrew and remove transducer
(86).
Installation
1.
Replace transducer (86) and use wrench to tighten to
47.5 - 61.0 N•m (35 - 45 ft-lb).
2.
Replace transducer wiring protector (88).
3.
Place wire in retaining clip.
4.
Replace transducer wiring grommet (86g).
5.
Replace pressure control box, page 19.
6.
Plug-in transducer wire.
7.
Replace front and rear shroud, page 18.
ti12999a
ti13075a
86
88
86g
ti12999a
