Installation
3A2960A
5
Installing the Lubrication Controller
1.
Select a flat surface to install the Lubrication Con-
troller. Drill mounting holes. Refer to Mounting Hole
Layout Provided in the Technical Data section of this
manual, page 16.
2.
Remove Lubrication Controller cover and align junc-
tion box with predrilled holes (F
IG
. 3, (a). Use two
screws (not provided) to secure junction box to
mounting surface.
AUTOMATIC SYSTEM ACTIVATION HAZARD
Unexpected activation of the system could result in seri-
ous injury, including skin injection and amputation.
This device has an automatic timer that activates the
pump lubrication system when power is connected or
when exiting the programming function. Before you
install or remove the Lubrication Controller from the
system, disconnect and isolate all power supplies and
relieve all pressure.
F
IG
. 3
a
a