Tip and Guard Assembly
332255A
11
Tip and Guard Assembly
1.
Insert metal seal and OneSeal.
2.
Insert SwitchTip.
3.
Screw assembly onto gun. Tighten.
Spraying
1.
Spray test pattern. Start with pressure turned to its
lowest setting, then gradually increase pressure
gradually until you achieve a consistent spray pat-
tern without heavy edges. Use smaller tip size if
pressure adjustment can not eliminate heavy edges.
2.
Hold gun perpendicular, 10-12 in. from surface.
Spray back and forth, overlapping by 50%. To pre-
vent heavy spots, before pulling trigger, first move
gun using a back and forth motion. When you stop
spraying, after releasing trigger, continue to move
gun back and forth for a few seconds.
Do not operate or spray near children. Do not aim the
sprayer at, or spray any person or animal. Keep
hands and other body parts away from discharge. For
example, do not try to stop leaks with any part of the
body.
ti2709a
ti2708a
ti2710a
