Startup
10
332255A
Startup
1.
Turn pressure control to lowest pressure.
2.
Turn power
ON
.
3.
Increase pressure to start motor and allow fluid
to circulate through drain tube for 15 seconds; then
turn pressure down.
4.
Turn prime valve horizontal.Take spray gun trigger
safety OFF.
5.
Hold gun against grounded metal flushing pail.
Trigger gun and increase fluid pressure to 1/2. Flush
1 minute.
6.
Inspect for leaks. Do not stop leaks with hand or a
rag! If leaks occur, do Pressure Relief. Tighten fit-
tings. Do
Startup
, 1. - 5, page 10. If no leaks, pro-
ceed to 6.
7.
Place siphon tube in paint pail.
8.
Trigger gun again into flushing pail until paint
appears. Move gun to paint pail and trigger for 20
seconds. Set gun safety ON. Assemble tip and
guard, page 11.
Do not operate or spray near children. Do not aim the
sprayer at, or spray any person or animal. Keep
hands and other body parts away from discharge. For
example, do not try to stop leaks with any part of the
body.
ti21028a
ti2706a
ti21031a
ti21028a
ti2712a
WASTE
WASTE
599a
PAINT
ti2714a
WASTE
ti2713a
