Graco FinishPro II 395, Руководство пользователя

Страница: 33 / 42

Drain Valve Replacement
333126A 33
Drain Valve Replacement
Removal
1. Relieve pressure , page 11. Disconnect power cord
from outlet.
2. Using a punch and hammer, tap pin (26) out of drain
handle (25).
3. Pull drain handle (25) and base (24) off drain valve
(23).
4. Using a wrench, loosen drain valve (23) and remove
it from manifold (15).
Installation
NOTE: Before installing new drain valve, be sure old
gasket (23a) and seat (23b) are not still inside manifold.
1. Thread drain valve (23) into manifold (15) opening.
2. Hand tighten securely. Using a wrench, torque to
120 to 130 in-lb.
3. Push base (24) over drain valve (23) and then drain
handle (25) over base (24).
4. Replace pin (26) in drain handle (25). If necessary,
use a hammer to tap it in place completely.
23a
23b
23
24
25
26
ti8384a