Graco FinishPro II 395, Руководство пользователя

Страница: 27 / 42

Compressor Replacement and Repair
333126A 27
Compressor Replacement and Repair
To repair compressor, use Compressor Service Kit
288723. Refer to Thomas Compressor manual pro-
vided. To replace compressor piston assembly, use Kit
288723.
Removing Compressor from Sprayer
1. Relieve pressure , page 11. Disconnect power cord
from outlet.
2. Remove front and back louvers from sprayer.
3. Remove toolbox from the sprayer.
4. Unscrew the compression fittings from the front and
rear of the sprayer.
5. Remove tubing.
6. Disconnect electrical connection from solenoid
valve at the rear of the sprayer.
7. Remove air filter from the back of the compressor.
8. Remove the four screws from the sprayer that are
located underneath the removed toolbox.
NOTE: Remove bottom screws first. When you have
one screw left to remove, hold onto the compressor so it
doesn’t fall out the bottom.
9. Remove compressor from sprayer.
10. Disconnect electrical connection.
NOTICE
To prevent damage to the tubing, the compression
fittings must be removed first.
Front Louvers Back Louvers
ti9259a
ti22706a
ti9262a
ti22707a
ti9263a