Graco E-Flo iQ Dispense System, Руководство по установке

Страница: 34 / 102

Hose Care Guidelines
34 333586D
Hose Care Guidelines
NOTE: Pressure check the hose assemblies. Refer to
the E-Flo iQ Supply System Operation manual for
instructions on priming the system. Check carefully for
leaks at the hose connections. If there are leaks, follow
the
Pressure Relief Procedure on page 37.
Do not use hose to pull the equipment.
Use 2 wrenches to tighten. Torque to specification:
Do not tape or cover hose.
Do not flex hose when cold.
Use hose support spring.
Do not clamp, squeeze, or zip tie hose.
Minimum bend radius:
Do not bend or crimp hose.
Do not twist hose.
Use proper length hose.
Flush Before Using Equipment
The equipment was tested with lightweight oil, which is
left in the fluid passages to protect parts. To avoid
contaminating the fluid with oil, flush the equipment with
a compatible solvent before using the equipment. See
the E-Flo iQ Supply System Operation manual for
information about flushing the equipment. See
Related
Manuals on page 3.
Fluids subjected to heat in confined spaces can
create a rapid rise in pressure due to the thermal
expansion. Over-pressurization can result in equip
-
ment rupture and serious injury.
•
Open a valve to relieve the fluid expansion during
heating.
• Replace hoses proactively at regular intervals
based on your operating conditions.