background image

All written and visual data contained in this document reflects the latest product information available at 

the time of publication. 

Graco reserves the right to make changes at any time without notice.

Original instructions.

 This manual contains English. MM 3A6285

Graco Headquarters: 

Minneapolis

International Offices: 

Belgium, China, Japan, Korea

GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA

Copyright 2018, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.

www.graco.com

Revision D, March 2019

Graco Standard Warranty

Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its 

name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. 

With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of 

twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be 

defective. This warranty applies only when the equipment is installed, operated and maintained in accordance 

with Graco’s written recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, 

damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper 

maintenance, negligence, accident, tampering, or substitution of non-Graco component parts. Nor shall Graco 

be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, 

accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, 

operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized 

Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or 

replace free of charge any defective parts. The equipment will be returned to the original purchaser 

transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, 

repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and 

transportation.

THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR 

IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF 

FITNESS FOR A PARTICULAR PURPOSE

Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The 

buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost 

profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. 

Any action for breach of warranty must be brought within two (2) years of the date of sale.

GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY 

AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, 

MATERIALS OR COMPONENTS SOLD BUT NOT MANUFACTURED BY GRACO

. These items sold, but not 

manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their 

manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these 

warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco 

supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold 

hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or otherwise.

FOR GRACO CANADA CUSTOMERS

The Parties acknowledge that they have required that the present document, as well as all documents, notices 

and legal proceedings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be 

drawn up in English. Les parties reconnaissent avoir convenu que la rédaction du présente document sera en 

Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés, à la suite de ou 

en rapport, directement ou indirectement, avec les procédures concernées.

Graco Information

For the latest information about Graco products, visit 

www.graco.com

.

For patent information, see 

www.graco.com/patents

TO PLACE AN ORDER, 

contact your Graco distributor or call 1-800-690-2894 to identify the nearest 

distributor.

Содержание Contractor PC

















Отзывы: