Graco Contractor PC Скачать руководство пользователя

Страница: 13 / 16

Repair/Replacement

3A6285D

Repair/Replacement

Replacing Cartridge

1. Relieve pressure. See

Pressure

Relief Procedure

, page 5.

2. Engage trigger lock (15).
3. Remove tip (26) and guard (25)

from gun (1).

4. Disengage trigger lock (15).
5. Depress 2 pins (11) and pull trigger

assembly (13) up into repair
position as shown.

6. Unscrew cartridge (2) from front of

gun (1).

NOTE:

If it is too difficult to remove by

hand, use a 1/8” Allen wrench to break
loose as shown.

7. Use a soft brush to clean out

internal passages of gun.

To avoid injury always read all warnings in

this manual and the sprayer manual,

before performing any repairs on the gun.

NOTICE

Never attempt to remove the cartridge

unless the trigger assembly (13) is in the

repair position --- cartridge will not come out.

If cartridge is left partially removed, the gun

will not operate properly.

Содержание Contractor PC

















Результаты поиска

Содержание Contractor PC

Отзывы:

Похожие инструкции для Contractor PC

Бренды по названию

Популярные бренды

Graco Contractor PC, Операция, Детали, Ремонт

Результаты поиска

Содержание Contractor PC

Отзывы:

Похожие инструкции для Contractor PC

Бренды по названию

Популярные бренды