Graco 309015B, Руководство по конструкции

Страница: 12 / 26

12 309015
System Components (cont.)
3. Injectors
Injectors
The function of the injector is to measure a preset amount of lubricant for dispense into bearing points for each au-
tomatic lubrication cycle. Injector outputs can be combined for a common bearing point with a large grease require-
ment but the output for a single injector can not be split into multiple bearing points. The injectors come in various
mounting configurations as shown below. For details of injector operation, refer to page 23.
Manifold mounted
9061A
Manifold
1 to 5 injectors mounted on a common inlet manifold. Up to 5 injector outputs can be combined for dispense to a
common bearing point with a large grease requirement using a cross over kit.
Replacement
9654A
Single injector used for replacing old worn out injectors onto installed manifolds.