Maintenance
18
3A5379B
Use platen with straight sided pail
1. Ensure the large diameter of the spacer (EG) is fac
-
ing
down.
Work the spacer (EG) up over the platen
by hand completely above the flange of the platen.
See F
IG
. 16.
2.
Working from the top
, use a screwdriver to position
the spacer (EG) between the flange and wipers
(EB). See F
IG
. 17.
Remove and Reinstall Wipers
Disassemble 20, 30, and 60 Liter Wiper Assemblies
1. Remove the wiper assembly; see F
IG
. 18:
a. For all single wiper platens: Remove the two
clips (470) with needle nose pliers and remove
the platen cover (469).
b. Remove the eight nuts (459) that hold the wiper
assembly to the platen casting (451) and
remove the wiper assembly.
c. See
Reassemble 20, 30, and 60 Liter Wiper
Assemblies
to change wiper sizes, styles, or a
complete wiper assembly.
2. Remove the eight nuts (459) on the wiper assembly.
3. Separate the top plate (457), spacer (452), wiper(s)
(453), wiper support (454), and bottom plate (455).
4. Clean, inspect, and replace worn components.
F
IG
. 16: Sliding spacer
F
IG
. 17: Installing Spacer
EG
EB
r_255468_313527_30a
EG
EB
r_255468_313527_32a
