Graco 24X960, Операция

Страница: 11 / 28

Error Code Troubleshooting
Blink Blink Blink Code Code Code Error Error
Error Type
Type
Type
Troubleshooting Troubleshooting Troubleshooting Steps Steps Steps
6 Alarm Motor Motor
Motor Temperature
Temperature
Temperature Fault
Fault
Fault
Motor is running too hot. Allow unit to cool.
• Check fan operation. Clean the fan and driver housing.
• Reduce pressure, duty cycle, or gun tip size.
• Move the unit to a cooler location.
7 Alarm Board Board Board Temperature Temperature Temperature Fault Fault Fault
The control board is running too hot. Allow the unit to cool.
• Check fan operation. Clean the fan and driver housing.
• Reduce pressure, duty cycle, or gun tip size.
• Move the unit to a cooler location.
8 Alarm Encoder Encoder Encoder Calibration Calibration Calibration Error Error Error
• Cycle power and check status indicator (L) to see if the error is still active.
• Calibrate the encoder (this code will blink if calibration is in progress).
• See Graco Graco Graco Contact Contact Contact Information Information Information ( Graco Extended Warranty, page 28 ).
9 Alarm Encoder Encoder Encoder Error Error Error
• Cycle power and check the status indicator (L) to see if the error is still active.
• Verify that the encoder cable (EE) is connected securely (see
Wiring Schematic, page 26 ).
• The encoder may need replacement.
• See Graco Graco Graco Contact Contact Contact Information Information Information ( Graco Extended Warranty, page 28 ).
10 Alarm Software Software Software Versions Versions Versions Do Do Do Not Not Not Match Match Match
• See the system manual for software token part number.
• Obtain software update token and follow Software Software
Software Update
Update
Update procedure.
11 Alarm Circuit Circuit Circuit Board Board Board Communication Communication Communication Failure Failure Failure
• Cycle power and check status indicator (L) to see if the error is still active.
• See Graco Graco Graco Contact Contact Contact Information Information Information ( Graco Extended Warranty, page 28 ).
12 Alarm Internal Internal Internal Circuit Circuit Circuit Board Board Board Hardware Hardware Hardware Failure Failure Failure
• Cycle power and check status indicator (L) to see if the error is still active.
• See Graco Graco
Graco Contact
Contact
Contact Information
Information
Information (
Graco Extended Warranty, page 28 ).
13, 14 Alarm Internal Internal
Internal Software
Software
Software Error
Error
Error
• Cycle power and check status indicator (L) to see if the error is still active.
• See Graco Graco
Graco Contact
Contact
Contact Information
Information
Information (
Graco Extended Warranty, page 28 ).
Slow Blink Deviation See Standby Mode, page 10 .
3A8124A 11