Graco 24F789, Инструкция по эксплуатации, Страница: 11 / 12

Instructions
313939E 11
9. Connect supply hose (a) to swivel (F
IG
. 26).
10. Adjust spring tension:
a. Insert socket over spring adjuster. Turn adjuster
1/4 turn clockwise (F
IG
. 27).
b. Refer to Table 1, page 5 to determine the num-
ber of full, clockwise turns required to correctly
set the spring tension for your hose reel model.
11. Pull on hose to test tension. If necessary, insert
socket over spring adjuster again and increase or
decrease tension by 1/4 turns until the hose retracts
and winds correctly.
12. The hose reel is now ready to be returned to ser-
vice.
NOTE: After hose reel is installed and returned to ser-
vice, it may be necessary to reposition the ball stop. To
reposition ball stop (F
IG
. 28):
a. Loosen screws (n) and nuts (p).
b. Slide ball stop (r) up or down the hose to new
position.
c. Tighten screws (n) and nuts (p) to hold stop (r)
securely in place.
F
IG
. 26
F
IG
. 27
a
1/4 Turn
F
IG
. 28
n
r
p