30 308993
Accessories
Use Only Genuine Graco Parts and Accessories
Fluid Swivel Connector 115898
5800 psi (40 MPa, 400 bar) Maximum Working Pressure
To ease movement of the gun and fluid hose.
1/4–18 npsm. 17–4 PH SST wetted parts.
Grounding Clamp and Wire 222011
12 ga, 25 ft (7.6 m) wire
High Pressure Fluid Ball Valve 238694
5000 psi (35 MPa, 350 bar) Maximum Working Pressure
3/8 npt(mbe). SST wetted parts, PEEK seats,
PTFE seals. Compatible with acid-catalyzed materials.
Can be used as fluid drain valve.
Bleed-type Master Air Valve
300 psi (2.1 MPa, 21 bar) Maximum Working Pressure
Relieves air trapped in the air line between the pump
air inlet and this valve when closed.
114362
3/8 npt(f) inlet & outlet
107142
1/2 npt(m x f) inlet & outlet
Air Line Quick-disconnect
208536
Coupling, female, quick-disconnect;
1/4 npt(f)
169967
Pin, male, quick-disconnect; 1/4 npt(f)
Air Hose 241811
100 psi (0.7 MPa, 7 bar) Maximum Working Pressure
1/4–18 npsm (fbe), 1/4 in. (6 mm) ID, 25 ft (7.62 m)
long, polyurethane tubing.
Fluid Hose 241812
3500 psi (24 MPa, 242 bar) Maximum Working
Pressure
1/4–18 npsm (fbe), 3/16 in. (5 mm) ID, 25 ft (7.62 m)
long, nylon tubing with polyurethane cover.
Accessory Air Cap 241882
For use with low viscosity fluids and low fluid flow
rates.
Air Pressure Verification Kit 241644
For use in checking air cap air pressure at various
supply air pressures.
Not
to be used for actual
spraying.
NOTE:
To be HVLP compliant, the atomizing air pres-
sure must not exceed 10 psi (70 kPa, 0.7 bar).
9270A
Plastic Conversion Kit 241616
Converts Models 241508 and 241509 to a plastic
needle ball and seat.
Carbide Conversion Kit 241617
Converts Models 241510 and 241511 to a carbide
needle ball and seat.
Pump Outlet Fluid Filter 223160
SST wetted parts, 1/4 npt(m) inlet, 1/4 npt(f) outlet,
60 mesh filter screen.
Gun Inlet Fluid Filter Kit 238563
Kit includes 3 filters. 60 mesh (.009 gap spacing) to
replace standard 100 mesh filter, for coarser particle
filtering.
Tip Filter Kit 241804
Replacement filters for spray tip orifice sizes 0.007,
0.009, and 0.011 only. Quantity of 10.
Brush 101892
For cleaning the gun.
Lubricant 111265
One 4 oz. (113 gram) tube sanitary (non-silicone)
lubricant for fluid seals and wear areas.
Содержание 241508
Страница 4: ...4 308993 Notes...
